Customizated Solutions

Indications: For Multi-unit Abutment, Multi-unit Abutment Plus. Material: Titanium(Ti6Al4V ELI) Specifications Length: 5mm/8mm

With three different fully coatings: titanium and Ti+HA, TBG Cementless Hip Stem system provides long term stability and minimizes thigh pain. Proximal horizontal microstructure prevents stem subsidence; The vertical grooves provide rotational and axial stability.

Material: Titanium alloy Specification DMR Mini Cover Screw, φ3.0mm

Material: Stainless Steel&Aluminum Features Widened cap for effort-saving. One-shot implantation, easy operation. Wave-style handle design for comfortable hold. 155°bending design for special tooth position manipulation. Inner cone design in the muzzle for easy connection. Specifications Automatic 2.0 Bone Tack Kit Automatic 2.5 Bone Tack Kit Automatic Bone Tack kit includes: Automatic Tack Handle with advanced Pull Back Mechanism Tack Positioner (in a protective case) 36 Titanium Bone Tacks (in varying sizes: 3mm, 4mm, and 5mm)

Material: Titanium Alloy(Ti6Al4V ELI) Specifications Guide Pin Multi-unit, NP 10mm Guide Pin Multi-unit, NP 20mm

Preferred cold working titanium grade 4 Through a special cold work process, new cold working titanium grade 4 is formed with better biocompatibility, higher mechanical strength, and longer durability while being compatible with pure titanium. After 5 million tests, the tensile strength of the implant raw material is higher than 900MPa. Higher yield point and strength are obtained through specialized cold working treatment. Specifications: DMR Implant, NP φ3.75 ×8.5mm DMR Implant, NP φ3.75 ×10.0mm DMR Implant, NP φ3.75 ×11.5mm DMR Implant, NP φ3.75 ×13.0mm DMR Implant, RP φ4.3 ×7.0mm DMR Implant, RP φ4.3 ×8.5mm DMR Implant, RP φ4.3 ×10.0mm DMR Implant, RP φ4.3 ×11.5mm DMR Implant, RP φ4.3 ×13.0mm DMR Implant, RP φ4.6 ×7.0mm DMR Implant, RP φ4.6 ×8.5mm DMR Implant, RP φ4.6 ×10.0mm DMR Implant, RP φ4.6 ×11.5mm DMR Implant, RP φ4.6 ×13.0mm DMR Implant, RP φ5.0×7.0mm DMR Implant, RP φ5.0×8.5mm DMR Implant, RP φ5.0×10.0mm DMR Implant, RP φ5.0×11.5mm DMR Implant, RP φ5.0×13.0mm

Forearm nail as a minimally invasive implantation, with tapered design of the proximal makes the insertion easier and reduces the stress on the bone at the tip of the nail. The proximal multiplanar locking design of ulnar nail provides more solution for different types of fractures.