banner

DMEqual System

The DMEqual System is composed of dental implant and implant accessories. TA4 pure titanium implant with the acid etching and sand blasting treated surface form a stable osseointegration.
  • Product Detail


Features:


  • Machined collar with Mircro Roughness: facilitate the attachment of soft tissues to form a tight protective layer
  • Implant with parallel walls: flexible application, suitable for different bone qualities and indications
  • Tapered tip: allow double cortical bone fixation and offer high initial stability
  • Double lead thread design: ensure higher insertion speed and optimize surgical experience.
  • Four-cutting self-tapping flute: achieve good self-tapping effect when the preparation hole is insufficient.
  • Built-in platform shifting: prevent soft tissue atrophy and achieve esthetic effect.
  • Internal screw connection: high-strength internal screw assures stable connection
  • SLA surface & Groove design: promote osseointegration and improve stability
  • 12° conical connection: disperse stress distribution, with close seal to prevent bacterial reproduction.
  • Hexagonal interlocking: improve mechanical strength and increase prosthetic options.

DMEqual surface treatment:


  • DMEqual implant surface treatment technique is an industry-university-research project in cooperation with Xiamen University and has already obtained national invention patent. The technique is different from the traditional sandblastd, acid-etched implant surface treatment technique.
  • The surface treatment adopts sand blasting with miced particle size sand to construct a special uniform multi-level micron morphology with deep holes on the flat surface, and the morphological structure is more complicated, thereby increasing the contact area between the implant and the bone tissue.
  • No sharp edges, a multi-level micron active surface, and a smaller contact angle.
  • The surface activation treatment is performed on the multi-level micron surface by high-temperature heating, and a thin crystalline titanium dioxide layer is formed on the surface by oxidation, which greatly reduces the contact angle and at the same time facilitates the biomineralization on the surface of the material after implantation. It is more conducive to achieving short-term load and long-term osseointegration of the implant.



Indication:


  • Partical Edentulism
  • Total Edentulism



Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products

Dedicated to rehabilitation, Double Medical focus on providing high-quality, affordable products, quick logistics and constant doctors' support.

Nobel Active All-On-Four Implant
DM Driving Hexagon Taper Self-tapping Implant II
The DM Driving System is composed of dental implant and implant accessories. TA4 pure titanium implant with the acid etching and sand blasting treated surface form a stable osseointegration.
Read More
LCP Pediatric Hip Plate 3.5/5.0 for varus osteotomies
3.5mm Pediatric Femoral Sliding Locking Plate
3.5mm Pediatric Femoral Sliding Locking Plate with anatomically precontoured low profile design is indicated for pediatric distal femoral fracture.
Read More
Collarless Polished Cemented Stem
PBG Proximal Bone Growth Cementless Stem
Indicated for severe painful and/or disabled joint from osteoarthritis, traumatic arthritis, rheumatoid arthritis, or congenital hip dysplasia. Grit-blasted diaphyseal region surface facilitate the bone ongrowth.
Read More
Titanium Mesh
Titanium Mesh for Thoracic-Lumbar Spine
Titanium Mesh is available in different heights for individual pathology and anatomical conditions. Open architecture for Titanium Mesh allows bony fusion and optimize bony ingrowth and its parallel end rings to restore normal spinal alignment and resist subsidence. In the meantime, Titanium Mesh is used for Trauma, Tumor, Spondylolisthesis, Degenerative disc disease of  Thoracic-Lumbar Spine.
Read More
3.5mm LCP® Medial Distal Tibia Plate
Distal Medial Tibial Locking Plate
Distal Medial Tibial Locking Plate offers an optimum solution for extra-articular and simple intra-articular distal tibial fractures.
Read More
Condylar Locking Compression Plate
Distal Medial Femoral Sub-condylar Locking Plate
Distal Medial Femoral Sub-condylar Locking Plate has anatomical design to treat the fracture between 8-15mm above the articular surface.
Read More
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

products

about

contact